| Black Plate | Normal Thickness | Normal Width | Normal Length (Sheet) |
| Single Reduce | 0.17 ~ 0.55mm | 700 ~ 1050mm | 500 ~ 1168mm |
| Double Reduce | 0.12 ~ 0.36mm |
| Black Plate | Box Annealing | Continuous Annealing |
| Single Reduce | T-1, T-2, T-2.5, T-3 | T-1.5, T-2.5, T-3, T-3.5, T-4, T-5 |
| Double Reduce | DR-7M, DR-8, DR-8M, DR-9, DR-9M, DR-10 | |
Excellent Paint Adhesion: TFS has excellent paint adhesion proper ties that far surpass those of tinplate, allowing its use for making DRD cans and adhesive bonded cans.
Excellent Heat Resistance: High-temperature baking causes neither discoloration nor deterioration in material proper ties.
Excellent Resistance to Sulphur Blackening: The metallic chromium in TFS has excellent sulphide resistance property when canning protein-rich foodstuff such as fish. TFS compensates for the expensive sulphur resistant lacquer.
Excellent Filiform Rust Resistance: TFS has an excellent under film corrosion resistance.
Excellent Alkali Resistance: The coating in TFS is not amphoteric. Alkaline products such as detergents and dispersion colours can be packed in TFS with advantage.
| Finish | Surface Roughness Alm Ra | Features & Applications |
| Bright | 0.25 | Bright finish for general use |
| Stone | 0.40 | Surface finish with stone marks that make printing and can-making scratches less consplcuous. |
| Super Stone | 0.60 | Surface finish with heavy stone marks. |
| Matte | 1.00 | Dull finish mainly used for making crowns and DI cans (unmelted finish or tinplate) |
| Silver (Satin) | —— | Rough dull finish mainly used for making artistic cans (tinplate only, melted finish) |
Oiling: if no engagement, TFS are electro statically oiled with DOS.
Slitting tinplate Coil: width 2 ~ 599mm available after slitting with precise tolerance control.
Coated and prepainted tinplate: according to customers’ color or logo design.
The temper/hardness comparison in different standard
| Standard | GB/T 2520-2008 | JIS G3303:2008 | ASTM A623M-06a | DIN EN10202:2001 | ISO 11949:1995 | GB/T 2520-2000 | |
| Temper | Single reduced | T-1 | T-1 | T-1 (T49) | TS230 | TH50+SE | TH50+SE |
| T1.5 | —– | —– | —– | —– | —– | ||
| T-2 | T-2 | T-2 (T53) | TS245 | TH52+SE | TH52+SE | ||
| T-2.5 | T-2.5 | —– | TS260 | TH55+SE | TH55+SE | ||
| T-3 | T-3 | T-3 (T57) | TS275 | TH57+SE | TH57+SE | ||
| T-3.5 | —– | —– | TS290 | —– | —– | ||
| T-4 | T-4 | T-4 (T61) | TH415 | TH61+SE | TH61+SE | ||
| T-5 | T-5 | T-5 (T65) | TH435 | TH65+SE | TH65+SE | ||
| Double reduced | DR-7M | —– | DR-7.5 | TH520 | —– | —– | |
| DR-8 | DR-8 | DR-8 | TH550 | TH550+SE | TH550+SE | ||
| DR-8M | —– | DR-8.5 | TH580 | TH580+SE | TH580+SE | ||
| DR-9 | DR-9 | DR-9 | TH620 | TH620+SE | TH620+SE | ||
| DR-9M | DR-9M | DR-9.5 | —– | TH660+SE | TH660+SE | ||
| DR-10 | DR-10 | —– | —– | TH690+SE | TH690+SE | ||
