DX52D

Dimension Range
DX52D is available in thicknesses of 0.50-3.00 mm and widths up to 1520 mm.
Available dimensions vary depending on coating.
DX52D - send request!

Properties according to DIN EN 10 346

Steel type

Short designation	VDA239-100	Surface finish	Material number
DX52D	CR1	+Z,+ZF,+ZA,+ZM,+AZ,+AS	1.0918

DX52D chemical element content (%)

Element	C	Si	Mn	P	S	Ti
Minimum	–	–	–	–	–	–
Maximum Value	0.12	0.5	0.6	0.1	0.045	0.3

Mechanical properties of DX52D

Rm——tensile strength (MPa)	270-420
Re – upper yield strength or R p0.2 – 0.2% Yield Strength (MPa)	140-300
A – the smallest. Elongation Lo = 80 mm (%)	26

DX52D galvanized sheet is also a relatively common galvanized sheet. DX52D is a galvanized sheet with a variety of materials inside, which can be made into zero sequins or ordinary flower sequins. But only for simple bending and deformation.