VR
Gnee Steel News

76MVA transformers sent to Ghana

Release Tme: 2024-03-27
Read:
Share:
76MVA transformers sent to Ghana

The transformer has a capacity of 76MVA, a primary voltage of 110kv, and a secondary voltage of 35kv. The tap changer is OLTC (on olad on-load tap changer).
50 mva power transformer
 
 transformer
GNEE Electrical Group Co., Ltd. is a technology-based enterprise specializing in the research and development, production, sales and service of dry-type transformers, power transformers, high and low voltage switchgear and related products. Our factory can provide a full range of distribution transformers.
Related Products
SPCD Cold-Rolled Steel Sheets
SPCD Cold-Rolled Steel Sheets with Cutting Service
Hot DIP Dx51d 120g Gi Steel Galvanized Coil
Prime Color Prepainted Galvanized Steel Coil
Prime Color Prepainted Galvanized Steel Coil
Related News
10MVA-33/33kV autotransformer in the tank
The secondary winding of the autotransformer is an integral part of the primary winding. Such a transformer seems to have only one winding, so it is also called a "single winding transformer".
2024-03-12
DX52D+Z Galvanized Steel Coil
Galvanized coil refers to a steel coil coated with a layer of zinc on the surface. Galvanizing is an economical and effective anti-corrosion method that is ofte
2026-06-17
Advantages of Cold Rolled Steel
Cold rolled steel starts with large billets or staves cast from hot liquid metal, then the billets are heated to eventually reach over 1700°F. At this high temperature, they are easily flattened into long sheets with a set of rolls and then rolled into large coils.
2024-02-04