The steel sheert is the product after the steel coil is cut, and the steel strip is the product after the steel coil is decoiler. If the width of the coil is more than 60 cm, it is a coil, and if it is less than or equal to this width, it is a strip. Theoretically, they are a product, but the form of expression is different.(As shown above)
“C” is added to the specifications of the coil, for example: 2.75*1500*C is the coil, 2.75*1500*6000 is the steel sheet.
The meaning of the numbers in the coil specifications: 2.75 represents the thickness of the coil, 1500 represents the width of the coil, and “C” represents the coil.
The meaning of the numbers in the steel plate model specifications: 2.75 represents the thickness of the steel sheet, 1500 represents the width of the steel sheet, and 6000 represents the length of the cold steel sheet.
1.Convenient transportation: Long steel sheets can be rolled into coil, so that it occupies a small volume.
2.Convenient processing: The length of the steel sheet can be cut more freely for coils, and one coil can be processed into steel sheet of various lengths.
